Inside Man: Ron Vigneri   5 comments

Info About Thruster and Speed Unlimited
by Ron Vigneri

The first Speed Unlimited shop Sam Sr., and Natalie Miller’s home at 45 Jerome Place was the two car garage of Sammy’s (Sam Miller Jr.) parent’s house. Tom Daniels was hired by Sam Sr., to build BMX bicycles having been known to Sammy through chassis-building Race Car Engineering in Alsip IL, SW suburb of Chicago in which Tom had been a partner. Tom’s partner was assassinated while walking out of a car parts store on Chicago’s South side. The shop was closed down after big legal problems with the late partner’s widow, Tom was looking for work. Tom was hired and designed the Thruster BMX frames. Tom had very good chassis/frame engineering skills. Miller Construction had property at 105 Dorsa Ave, Wayne, NJ that was used for a storage and staging area and had a building on it that became the Speed Unlimited factory.

Thruster & Vanishing Point references came from rocket cars that were part of a Rocket Man Inc., corporation jointly owned by Sammy and Ron Vigneri, a rocket engineer, out of Kinnelon NJ ( One Vanishing Point chassis was one that that Tom had produced at Race Car Engineering. The rocket cars and racing achievements were always utilized for the Thruster BMX bike publicity and marketing. All the BMX bike models produced by Speed Unlimited usually featured rocket technology related names.

Speed Unlimited had contracts with Hutch and later, Puch, for BMX bike production. Quality control issues and timely production were always an issue at Speed Unlimited. Having Sammy running the company was a problem with him being only minimally available. It was a really disorganized company and always financially stressed. Lee Van Ormer was a New York City entrepreneur and was sold controlling interest in the company. Lee was a good investor but not so much an administrator. The company stayed disorganized and stressed financially. Tom had been seriously electrocuted years before, pre race car shop, while working as a lineman, had been in a contentious divorce, and had all the stress from Speed Unlimited with health effects that were probably the reasons for his fatal heart attack.

Hutch was started by a guy named Richard Hutchins in Maryland. Sometime around 1980 he put his bike ideas into motion and started his own company, Hutch. Profile designed and manufactured the first Hutch frames and Speed Unlimited picked up a contract for some of the Hutch production. Profile became famous for their 3 piece cranks. Later Speed Unlimited (in New Jersey) took over production. Speed Unlimited also were the makers of the Thruster racing bikes. Speed Unlimited was also starting to pile up a lot of Hutch bike frames and forks that had minor chrome flaws. This is where colored Hutch frames came in, to cover the minor flaws so they decided to paint them instead of scrapping them.

Ron Vigneri had helped Sammy with numerous activities concerning the bike business including a bike frame design that could be rapidly manufactured from four arced chrome-moly tubes that required no jigs to weld the head, bottom bracket, dropouts, and seat tubes to the frame tubes, and the design could be produced in all bike wheel/frame sizes. The Phazer frame design could be built with far less labor and in less time with less equipment than Thruster or its variants. Ron named the bike the Phazer. The first BMX prototype is shown at:

Five Phazer prototypes were built in 1981 at Speed Unlimited to introduce Tom to the new manufacturing process. The Phazer was to be the next Speed Unlimited production BMX model and, if that went well, bigger size models would follow. A production run of 100 was funded by Ron and all were sold directly. A business arrangement could not be worked out between the parties and Ron held the design and still does. Sammy and Ron ended their partnership in court proceedings in 1983. In 1985 Sammy and Henk Vink (both now deceased former rocket vehicle racers) copied the Phazer design and built the bikes in Sweden that were marketed under the name, “Rocket X-1”, with them claiming to have invented the design. In the period between, 1983-85, Speed Unlimited floundered and then faded away.

Interesting note: The third Phazer produced (serial number 3) was the first chromed production run bike that passed all quality control inspections and is still in NOS condition has been owned and only demo ridden by Ron over the 33+ years since it was built.
Thanks Ron, for the insight. Please feel free to email me any pictures or info for publication. Again thanks!


Posted October 30, 2014 by Racer in History of Thruster

5 responses to “Inside Man: Ron Vigneri

Subscribe to comments with RSS.

  1. Hey. I was the first full time employee at Jerome place. RT Lang… After thruster closed up I became a tin knocker and I’m retiring to build bmx bikes. Have some great designs.. And I loved building bikes. Watch for TUBE WORX bmx…

    • Very cool. Will keep an eye out for it. I started Hyper Bicycles in 1991 with Clay Goldsmid. Very exciting to launch and watch a business grow. I left Hyper in 1994 and started American Bicycles a few years later. I regret never racing a Thruster or even driving up the 1 1/2 hours to see Thruster HQ BITD.

    • RT if you want a high performance bike design that you can quickly build without jigs, I have a design for sale with all the production details and drawings. I have the original prototype frame and the final production version in BMX size which will be included in the sale. The design can scale up and down in size (16/20/24/26). If you have an interest contact me.

  2. Where is this pic from?

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: